- Home
- ยป
- Our Product Range
- »
- Level Transmitters
Level Transmitters
Ultrasonic Level Transmitter
Minimum Order Quantity: 100 Piece
Product Brochure
| Measurement Range | 0.5-5 m |
| Brand | LFIA |
| Usage/Application | Big Storage Tanks |
| Model Name/Number | LFT2 |
| Output Signal | 4-20 mA |
| Material | PP |
| Ambient Temperature | -10 deg. C - 60 deg. C |
| Accuracy | 0.25% |
| Packaging Type | Box |
| Color | Blue & Grey |
| Full Scale | 5,8,10 m |
| Power | DC 9 - 32 V |
| Power Consumption | Less than 0.8 W |
| Max Measure Error | 0.3% on full scale |
Application:
- Wastewater treatment
- Proximity Detection
- Sedimentation pool
- Coal washing process
- Obstacle detection, collision avoidance
- General purpose distance detection
Features:
- High precise
- Strong anti-interference
- Automatic temperature compensation
Smart Displacement Type Level Transmitter
Minimum Order Quantity: 100 Piece
Product Brochure
| Packaging Type | Box |
| Material | Monel, Hastelloy, SS, etc |
| Model Name/Number | LFT5 |
| Usage/Application | Industrial |
| Brand | LFIA |
| Isolated Power Supply | 35V dc for explosion proof b) 30V dc for intrinsically safe |
| Operatine Amb, Temp. | 65 Deg C |
| Zero Adjustability | 15% of sensing element range |
| Damping | 32 Seconds |
| Specific Gravity | 0.3 to 1.2 |
| Display | LCD |
The LFIA series measures changes in Liquid Level, Specific Gravity or Interface Level and transmits a current output signal proportional to the change in the process parameter. The change in the process parameter causes a change in the displacer position, which is transferred to the Torque Tube producing a rotary motion. This rotary motion is transferred through bellow to lever assembly that is supported by flexure strips. Magnets attached to the lever assembly move past a Hall effect position sensor that converts the magnetic field signal to an electrical 4- 20mAsignal.
Side Mounted Level Transmitter
Minimum Order Quantity: 100 Piece
Product Brochure
| Type | Digital |
| Material | Stainless Steel |
| Model Name/Number | LFT6 |
| Brand | LFIA |
| Usage/Application | High viscosity |
| Frequency | Side mounted |
| Ambient Temperature | Upto 80deg. |
| Voltage V | 24V Dc |
| Size | cost |
| Length Unit | costomisation |
| Temperature Unit | Upto 80deg. |
| Temp Press | On request |
| Isolated Power Supply | 24V DC |
.Smart LCD Display
.sensor working on liquid pressure
. used in high viscosity also
. suitable for storage tanks
By-pass level trasmitter
Minimum Order Quantity: 100 Piece
Product Brochure
| Type | Rigid |
| Material | Stainless Steel |
| Model Name/Number | LFMBC |
| Brand | LFIA |
| Usage/Application | Level indication |
| Frequency | costomistion |
| Ambient Temperature | 80 deg. |
| Length Unit | Costomisation |
indication display mechani does not come in direct contact with the liquid media. Special designed cylindrical magnetic float as per desity of liquid mangnetical coupled follower capsule or roller or ball indicates the liquid level externally.
Float Operated Level Transmitter
Minimum Order Quantity: 100 Unit
Product Brochure
| Model Name/Number | LFT3 |
| Type | Digital |
| Usage/Application | Industrial |
| Packaging Type | Box |
| Material | Aluminium |
| Brand | LFIA |
| Output Signal | 4-20mA |
| Frequency | 50 Hz |
| Ambient Temperature | 100 Deg C |
Application:
- Diesel, Generator facilities, Petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower etc
Features:
- Reliable, Maintenance free
- SS or PP construction
- Easy to install and operate
- Explosion Proof certificate available
Magnetic Float Level Transmitter
Minimum Order Quantity: 50 Piece
Product Brochure
| Type | Digital |
| Material | Stainless Steel |
| Model Name/Number | LFT3 |
| Measuring Range | max. 6m |
| Output Signal | 4-20mA |
| Brand | LFIA |
| Ambient Temperature | 50 Deg. C |
| Pressure Unit | upto16 bar. |
| Size | 10-15 mm. |
| Temp Press | upto 80 deg. C |
| Isolated Power Supply | 24V Dc. |
| Output | 4-20 mA,2 wire |
| Country of Origin | Made in India |
| Power Supply | 24 VDC loop |
| Housing | Aluminium,Weather proof or Exp proof |
| Operating Temperature | 100degC (45 deg C for PP model) |
| Connection | Flange/Threaded |
| Operating Pressure | 10 kg/cm2 |
| Moc | SS/PP |
| Pipe Length | Upto 3000 mm |
| Resolution | 15 mm |
Magnetic Float Level Transmitter is composed of a float and sensing rod. As the float raised or lowered by the is liquid level, the sensing rod will induce a resistance output, which is directly proportional to the liquid level. Transmitter consists of array of magnetic sensors enclosed inside a sealed stem. Transmitter is made in various lengths in SSS or PP construction. The magnet float level transmitter provides a 3-wire resistance output or can be equipped with an appropriate level transmitter to provide a 4-20mA analog signal indicating liquid level. The sensing guide rod includes a series of reed switches along the entire measuring length. Placement of reed switches pro-vides either of two possible measuring resolution.
Application:
- Diesel, Generator facilities, Petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower etc
Features:
- Reliable, Maintenance free
- SS or PP construction
- Easy to install and operate
- Explosion Proof certificate available
Additional Information:
- Item Code: LFT3
- Delivery Time: 1-2 weeks
Capacitance Level Transmitter
Minimum Order Quantity: 100 Unit
Product Brochure
| Type | Rod/Probe |
| Output Signal | 4-20mA |
| Brand | LFIA |
| Material | Stainless Steel |
| Temp Press | upto max. 15 bar. |
| Output | 4-20 mA, 2 wire loop |
| Temperature | -20 to 100 deg C or special (upto 200) |
| Connection | 1/2" standard for rod version |
| Probe Material | SS Rod/Rope insulated party or fully with PTFE |
| Electronics | -15 to 65degC |
| Housing | Aluminium, Weather Proof |
| Voltage Supply | 12-30VDC |
When the probe become covered with material to be measured the capaci-tances will increase and the change will be measured and covered into an analogue (4-20 mil) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non conductive Liquids.
Conductive Material:
- Water based solutions. Acids based etc only insulated probe are suggested
Non Conductivity Material:
- Mostly petrochemical and solvents insulated or non insulated probes can be used
Features:
- Long Range
- Rod and probe type
- For conductive and non conductive liquids
Submersible Level Transmitter
Minimum Order Quantity: 100 Unit
Product Brochure
| Model Name/Number | LFT1 |
| Usage/Application | Measurement |
| Output | 4-20mA |
| Range | 0 to 200 mtr |
| Brand | LFIA |
| Output Signal | 4-20mA |
| Ambient Temperature | 50 deg. C |
| Color | Silver |
| Accuracy | 0.25 % |
| Measuring Range | 5 meter |
| Power Supply | 24 VDC |
Radar Level Transmitter
Minimum Order Quantity: 100 Piece
Product Brochure
| Model Name/Number | Siemens Lr 510 |
| Type | Digital |
| Brand | LFIA |
| Usage/Application | Solid in large tanks |
| Model Name | LFIAR |
Magnetic Float Operated Level Transmitter
Minimum Order Quantity: 1 Piece
Product Brochure
| Type | Digital |
| Material | Stainless Steel |
| Model Name/Number | LFT3 |
| Brand | LFIA |
| Usage/Application | Oil, Condensate Water |
| Ambient Temperature | 100 deg. C |
| Measuring Range | upto 6 metre |
Additional Information:
- Delivery Time: 2-3 days
Hydrostatic Level Transmitter
Product Brochure
| Material | Stainless Steel |
| Measuring Range | 5/10 mtrs-100 mtrs |
| Brand | LFIA |
| Usage/Application | Raw water, Firefighting, tubewell |
| Ambient Temperature | 50 Deg. C |
| Protection-Rating | IP 68 |
| Output | 4-20 mA, 2 wire |
| Protection | IP 68 |
| Cable | Polyethylene |
| Supply | 24 V DC, Loop |
| Sensor Material | SS 316L |
Probe consists highly stable piezo resistive sensor and precise evaluation electronics in stainless steel housing. Probe is sealed, thus protect its pressure from mechanical damage. A cable is integral of probe, consists of 2 wires & a capillary tube comes in various range as per requirement. Other end of capillary tube is kept open to atmosphere for air to flow freely(for atm. pressure compensation).
Transmitter is simply hanged inside tank through its cable. The sensor transducer is enclosed in a liquid tight SS316 hosing and assembled to a liquid proof cable. Due to liquid static pressure inside tank, transducer signal is converted into 4-20 mA( 2 wire) output is correspond to liquid level accurately. The change in level is detected by comparing the pressure difference between pressure of water column over the probe & atmospheric through capillary tube. This generates a output signal which is converted into 4r20mA (2-wire) signal.
Features:
- Long measuring range, customised length
- Extension Cable Flange model
- IP 68 sealed probe of SS
- Easy to install, operate, no moving part, high accurate
- Special polyurethane cable ensuring more flexible and endurable
- Reliable, Economical
Additional Information:
- Item Code: LFT1
Ultrasonic Level Remote Transmitter
Minimum Order Quantity: 50 Piece
Product Brochure
| Type | Remote Display |
| Brand | LFIA |
| Frequency | 20 KHz |
| Output | 4-20 mA,2 wire |
| Working Temperature | 80 deg.C. |
| Model Name/Number | LFT2-R |
| Material | Aluminum |
| Power Supply | 24V DC |
| Dead Zone | 300,500 mm |
| Range | 5/8/10/15/30 mtrs |
| Temperature | 0-60 deg C |
| Response Time | 500 ms |
| Display | Remote LCD display |
| Programming | By push Button |
| Housing | ABS |
| Connection | Threaded or Flange |
| Protection | IP65 |
Ultrasonic Level Remote Transmitter of two wires serial is a sealed transducer best suited for applications where harsh or hazardous environments are a problem. Been made of energy conservation components, It can work be-tween DC 9-32v power supply. Only two wires are enough to supply power and acquire the measured value. LCD display is convenient for onsite setting.
Application:
- Diesel storage tanks, Water, Storage tanks, waste water treatment, pits, ponds, sewage acids, solvent, juice, beverages etc
Features:
- Easy Calibration Programming
- Strong waves
- LCD display
Additional Information:
- Item Code: LFT2-R
- Delivery Time: 1-2 days
Ultrasonic Level Indicator Transmitter
Minimum Order Quantity: 1 Piece
Product Brochure
| Model Name/Number | LFT2 |
| Usage/Application | Diesel, Water |
| Material | PP |
| Type | Magnetic |
| Brand | LFIA |
| Size | Compact |
| Packaging Type | Box |
| Number Of Pieces Per Packet | One |
| Measuring Range | upto 30 metre |
| Specific Gravity | 1 |
| Power Supply | 24V Dc |
| Beam Angle | 12 deg.C |
| Dead Zone | 300 mm to 600 mm |
| Country of Origin | Made in India |
LEVEL AND FLOW INDUSTRIAL AUTOMATION is one of the leading manufacturer and supplier of ULTRASONIC LEVEL INDICATOR TRANSMITTER
Additional Information:
- Production Capacity: 20 pcs monthly
- Delivery Time: 3 Weeks from date of PO
- Packaging Details: Box